In what order do the repairs start?

Home renovation is considered the most difficult and crucial stage in the life of every person. There can be many reasons for doing it. Some have to do this because they bought new housing without finishing, while others just want to update the old apartment and give it a beautiful stylish look.

Regardless of whether cosmetic or major repairs are planned, it needs to be done correctly. To do this, one should not only mentally prepare for the upcoming process, but also carefully develop an action plan, on which the final result will depend..

Preparatory work

The main condition for carrying out repairs is to maintain consistency in all stages of construction work, therefore, first of all, a project is created that allows you to calculate the costs associated with the acquisition and installation of the material. Then a sketch of the apartment with the layout of the rooms is drawn, and measurements of the space are put down, which in the future will facilitate not only the design, but also the arrangement of furniture.

After that, preparatory work begins in the form of dismantling the old coatings. Ideally, repairs should take place in an empty and clean room where free movement around the perimeter is possible. Therefore, all furniture is removed from the premises, if the modules are voluminous, then they can be moved to the center and covered with a film.

If the apartment will be redecorated without replacing the floor covering, then its surface should be protected from dirt and all kinds of mechanical damage. To do this, carpet, laminate or parquet is first covered with dry sheets of paper, and then a film is laid on top and fixed with tape. The same applies to linoleum, it is not afraid of dirt, so it is not necessary to remove it, since after repair the product will be quickly washed off. In addition, you will need to de-energize the room and remove all switches with sockets, and seal the boxes in the walls with special tape.

In the event that, according to the plan, there is a replacement of door frames and windows, then they must be dismantled before the start of finishing work. After installing new structures, it is advisable not to remove the protective film from doors and slopes, since during the repair, contamination of joints and openings is possible.

As for the walls and ceiling, they also need careful preparation. Their surface is cleaned from the old base, leveling and priming are performed. In case of large cracks, it is necessary to apply several layers of putty and grind everything. Regardless of the type of finish chosen, the walls and ceiling must be even and smooth. Therefore, plastering with a mixture that includes sand and cement is often used for this. In order to have good sound and heat insulation in the room, a metal frame and mineral wool are additionally applied to the surface of the walls..

When redeveloping an apartment, sometimes you have to deal with the installation of partitions. To expand the space in the room, the adjacent walls are dismantled, and the new zone is laid out with foam block, brick, or plasterboard is sewn on. After screed floors and plaster walls, a new wiring is installed for electrical wiring.

The sequence of actions during the repair: the pros and cons of the methods

Any renovation ends with a beautiful transformation of housing, but for this you need to perform a number of activities. As a rule, all finishing works are carried out “from top to bottom” and first a “rough” version of the design is done, and then the rooms are decorated. So that the construction process goes right, experts recommend adhering to the following rules:

  • Wall repair. They can be covered with both plaster and wallpaper. After pasting, they are engaged in installing the flooring and installing thresholds, baseboards, hanging cabinets and shelves. This is suitable when linoleum is laid on the floor, but if a screed is made in the room, then it is best to glue the canvases upon its completion..

  • Installation of interior doors. They are installed both before and after finishing the walls, but the last option is the most correct, since when installed on the walls, potholes may appear and the appearance of the plaster will deteriorate..

  • Radiators and new windows. Their installation is dusty, but can be carried out at any stage of the repair. The only thing that needs to be done is to protect the walls and floor from welding..

  • Installation of electrical wiring. As a rule, in modern houses, a hidden type of wiring is carried out, so this event is similarly accompanied by noise and dust..

  • Ceiling decoration. It can be tightened only when the issue with electrical installation is resolved. It is worth noting that it is advisable to install suspended structures after decorating the walls, if this is done earlier, then there will be difficulties in gluing wallpaper. Many in the rooms make tiles on the ceiling, so it is recommended to fix it after decorating the walls.

In addition, unforeseen circumstances may arise in the workflow. For example, only the replacement of linoleum was planned, and after removing the old floor covering, it turned out that the base still needed to be additionally leveled. To quickly solve this problem, it is recommended to use special mixtures for leveling, this will save both labor and time.

All types of finishes, although carried out in turn, their sequence may vary depending on the availability of materials and labor.


Doors are considered the main decorative element in every room. When the apartment is being renovated, they are installed last. Then they mount sockets, baseboards, plumbing and clean the room from debris. If the house has a laminate flooring, then installation of interior structures can be done in two ways:

  • First, they decorate the ceiling, walls, floor, and then insert the openings. This method allows you to dismantle old doors and align walls with slopes. Such an installation is very popular with craftsmen, as it has its advantages: the ability to make the correct measurements, ease of installation. The only drawback in this case may be damage to the flooring..
  • Installation of structures before laying the laminate. It is also used by craftsmen, but before performing it, it is important to take into account one point – the laminate will take up part of the height of the floor covering, so you need to determine the margin between the threshold and the canvas with maximum accuracy. Choosing this method, you can not worry about the appearance of scratches and dirt on the laminate, but only professional specialists can cope with such work, and it is recommended to use it only when the old structure does not require replacement.

In addition, during installation, it is often necessary to file the door frame. In order for the installation process to take place with a minimum investment of time, it is worth initially calculating everything well and leaving gaps for a new coating and filling, to protect the structure from dust during repairs, it is recommended to glue it with a film.

Wall coverings

The walls in a special way ennoble the atmosphere in the room, filling it with an atmosphere of comfort and home warmth. Their decoration, as a rule, is done only after the baguettes have been installed, but the ceiling itself has not yet been suspended. This is explained by the fact that when fixing the baguettes, dust may appear, so if you glue wallpaper on the wall or lay out a decorative stone in front, its surface will absorb all the construction dirt. It is realistic to mount the ceiling after wall repair only if:

  • The surface of the wall covering is durable and reliable. It must withstand the mechanical load from the operation of the hammer drill and not crumble..
  • During construction work, a vacuum cleaner will be used.
  • The decorative wall decoration is stain resistant. For example, photowall-paper, in this case, will not work, they will quickly become covered with dust, and it is almost impossible to clean their paper surface.

In addition, laying the suspended structure will complicate painting and pasting. Therefore, it is best to fix the baguette at the beginning, then lay the floor, finish the walls and only then fix the ceiling itself.

Ceiling products

The stretch ceiling is very popular in the modern interior. It is characterized by a long service life, made of material harmless to human health, and easily cleaned from dust. It is also worth noting that the installation process of such products is carried out quickly. If the walls of the room are pasted over with old wallpaper, then before attaching the ceiling plinth and stretching the ceiling, you can safely re-glue them. In the event that the owner of the house wants to comprehensively update the surface of the walls and make them level, then pulling the ceiling first will not work.

By choosing installation of ceiling products before wall decoration, craftsmen save themselves a lot of trouble: the canvases will not deteriorate and not become dusty during construction work, and to hide the cracks between the ceiling and walls, they use fillets that look like wall corners. Sometimes suspended ceilings are attached after gluing the walls, but the likelihood of damage to the wallpaper increases.


To make the base under the floor even, at the beginning of the repair it is recommended to make a screed and pour under parquet or laminate. The floor covering is laid most often at the end of all rough work, but if it is done earlier, then its deformation may occur and cracks will appear. That’s why first, the ceilings are suspended, the room is well cleaned and the laminate is laid. In the case when the room does not have thresholds, then the material is placed one to the other..

It is not recommended to carry out work at the same time in several rooms, as the laminate may not match.

Ventilation system

An important stage in home renovation is the installation of all utilities. A ventilation system and air ducts are installed in the premises. If an air conditioner will be installed in the room according to the project, it is necessary to hang up its internal and external units, as well as to lay cables and tubes. Such construction work is considered rough, therefore, they must be performed in strict sequence:

  • Determine the layout of the apartment. Relocate and dismantle wall partitions, remove the old floor and tiles.
  • Lay the necessary openings in the walls.
  • Install air conditioner.
  • Provide ventilation.
  • Lead the wiring according to the originally drawn diagram.

After all this has been done, you can start decorating the walls and flooring..


Renovation of an apartment is always considered difficult and costly, as it takes a lot of effort and money. The only positive aspect of this construction work is the new type of housing. Stylish décor transforms simple rooms into chic and cozy nooks for living. So that the repair process goes quickly and invisibly, it is worth adhering to simple rules:

  • Don’t fuss or rush. It is necessary to carefully think over and calculate everything, draw up an action plan, select finishing materials and find professional specialists who could cope with the work with high quality.
  • When composing a project, it is worth taking the dimensions not from the passport of the housing, but independently making measurements. This will help you avoid mistakes..
  • Save. It is quite possible to make major repairs with your own hands and not overpay for hired labor. Of course, it will take more time, but the saved money can be used to purchase new furniture..
  • It is advisable to order the services of specialists in trusted companies that have good reviews and draw up contracts.
  • When making the first renovation in a new house, you do not need to buy expensive building materials. The building can shrink over time, so it is recommended to wait at least two years and then start grandiose work..

In this case, the walls can be trimmed with inexpensive wallpaper, a curtain can be installed or a foam tile can be glued to the ceiling, and linoleum is perfect as a floor covering..

For information on what the ideal repair sequence should be, see the next video..

About the author