Corner floor-standing kitchen cabinets

The kitchen is a special place in every home, which should be not only cozy and modern, but also as functional as possible. The set is the main furniture for any kitchen. A floor-standing corner cabinet, which is most often used to install a sink, helps to save space, especially in small-sized kitchens..



When organizing a kitchen space, you strive to take into account all the features of the room. Thus, your kitchen becomes as convenient as possible for you. Now you have the opportunity to make a custom-made kitchen set, taking into account the required dimensions and the general style of the kitchen space. But sometimes it happens that it is impossible to find a corner cabinet of the right size to suit your wishes. In this case, you can make a cabinet with your own hands using the necessary materials..


In every apartment, the corner is the most useless and inconvenient area, where it is quite difficult to rationally place furniture and household appliances. In the kitchen, a corner can be a very useful space, where a cupboard under a sink or a dishwasher can easily fit. A corner kitchen set is ideal for small kitchens. So you can effectively use every centimeter of the area, and the kitchen will be more spacious and functional..

Most kitchen units assume that you will be using a corner to set up a corner cabinet with a sink. Thus, you can easily connect to communications.

Floor-standing corner cabinets with a sink have the most convenient location, as they are located in the center of the entire set. The cooking and cleaning process will become more convenient and faster. If you prefer a trapezoidal cabinet, then it will be a great place to install a dishwasher or store a trash can and various cleaning products..

If the base cabinet is installed in the far corner from the window, then it is recommended to provide the space with additional lighting for greater comfort during cleaning and cooking..



A rectangular corner kitchen cabinet is easier to manufacture and install, but less comfortable and roomy. As a rule, such a cabinet consists of two halves, which are installed adjacent sides to each other. The joining of the countertops forms a right angle and also follows the shape of the corner in the room.

A corner kitchen cabinet with two or one doors can be made of your choice. To make the cabinet in the corner more practical, install shelves of various lengths and widths in it..


Corner kitchen cabinets for a trapezoid sink also join the wall and form a right angle, but the outer part of the cabinet has two obtuse corners. Of course, such a cabinet is more convenient and spacious, its internal space allows you to place more items of kitchen utensils in it, a water filter and a trash can. In addition, the work surface of such a cabinet is much larger, so a large sink with a place for drying dishes can be built into it..

You can also install a double sink, which is the most convenient option for washing dishes. The cost of a corner cabinet in the form of a trapezoid is much higher than a rectangular one, but its convenience can hardly be overestimated. If you decide to install a corner kitchen unit, then you should still give preference to a trapezoidal cabinet under the sink. In the process of using, you will understand that the money was well spent.

Both rectangular and trapezoidal cabinets may not necessarily be designed to accommodate a sink. You can also use it under any built-in appliances, such as a large hob and oven..

In addition to the usual hinged doors, you can also choose a cabinet with drawers for storing cutlery..

Dimensions (edit)

While every homeowner has their own custom-sized kitchen, there are some general dimensions to consider when ordering a corner base cabinet. When making a trapezoidal cabinet, the size of the side walls that are adjacent to the wall is taken into account. As a rule, they are 90 centimeters long..

Speaking of height, the generally accepted dimensions, which are the most optimal for corner kitchen cabinets, are considered to be 70-72 centimeters from the floor itself. The lower plinth can have a height of 10-12 centimeters. These dimensions are the most convenient for using and maintaining a corner cabinet..

The laminated chipboard panel is most often used as the material of the tabletop, which also has its own dimensions: thickness 3-6 centimeters, length 300 centimeters, width 60 centimeters.

When ordering a kitchen corner cabinet, it is necessary at the very initial stage to provide for all the nuances: the number and size of shelves inside the cabinet, the location of the holes for the output of pipes and wires for lighting. It is much easier to discuss all these points at once than to correct the shortcomings on your own..

If you decide to make the cabinet and the countertop from chipboard yourself, then you need to treat all open edges with a water-repellent impregnation in order to save the furniture from swelling and damage..


What will be inside your corner kitchen cabinet largely determines its convenience, practicality and functionality. Hanging shelves are an unusually convenient way to fill a cabinet. You can place cleaning products and small kitchen utensils on them. At the same time, you will have a lot of free space..

Instead of a trash can, which takes up quite a lot of space, you can use a special bracket that attaches to the door. A special garbage bag is attached to this bracket, which is easy to change when filling.

Do not forget about the hooks, which are sometimes so lacking in the kitchen. You can hang various rags on them, which will dry much better in an upright extended position..

Carousel shelves that are attached to the doors are also very popular. This type of shelves is very convenient to use, but makes it difficult to access the space inside the cabinet..

Crafting tips

If you do not trust furniture companies and decide to make a corner kitchen cabinet yourself, then some peculiarities should be taken into account. In order for your kitchen set to look harmonious, you need to choose the right color for the cabinet front and countertops. The optimal material for the manufacture of the cabinet is chipboard with a laminated surface. There are a lot of color options for this material, so it will be easier for you to choose the right color.

Hardware stores now offer a large number of fittings. In the event that you do not find suitable handles, you can change all the handles on the doors of the kitchen set. This is quite troublesome, but it is a good solution when creating a common style for all cabinets..

After you have decided on the material and its color, draw a detailed layout of your cabinet, taking into account all the required dimensions. Determine immediately how many holes and notches the back of the cabinet will have. When assembling the already prepared parts of the cabinet, carefully treat all ends with a water-repellent impregnation.

How to choose

Making a custom-made corner cabinet according to individual dimensions is the most optimal option. As a rule, furniture factories have all the necessary automatic equipment that helps to make furniture to the exact size of the customer..

If you already have a kitchen set, but you decided to slightly change its appearance by adding a corner cabinet to its set, then your choice will be obvious. You will be based on the sizes and colors that are present in the headset.

In the event that you order a new kitchen set with a corner base cabinet, then you will have to flip through a bunch of catalogs to find that one kitchen. In order to choose the right model for a corner cabinet for a sink, take into account the dimensions of the kitchen space. From this, it will already follow which cabinet model to choose: rectangular or trapezoidal..

Whatever your corner cabinet is, it should be as convenient as possible for you. It is still recommended to give preference to a cabinet in the form of a trapezoid, as practice shows that it is much more convenient for operation..


About the author