HDF kitchen apron

Every modern and functional kitchen has many useful elements. One of them is an apron – a type of wall decoration that plays a protective role. Basically, these surfaces are located in work areas: near the stove, sink and countertops. The apron not only protects the walls from dirt, but also perfectly complements the interior of the room.

7photos

Finishing requirements

Before you start creating a kitchen apron on the wall, you need to familiarize yourself with the basic requirements that this coating must meet. These include:

  1. resistance to high temperatures. This is especially true when the kitchen set includes a gas stove..
  2. hygiene. The material of which the apron is made must not absorb moisture or dirt. This contributes to the rapid development of bacteria, which negatively affects the cleanliness of the house. The material must have low porosity.
  3. moisture resistance. There is always dampness in the kitchen, even if the hood is operating at full capacity. The apron should not be afraid of moisture and steam.

Today there are a large number of different materials that are used for wall decoration in the kitchen. HDF panels occupy a special place in this list. In comparison with many types, this material has rather high performance properties, which you should familiarize yourself with..

7photos

Peculiarities

HDF kitchen aprons consist of pressed board. The basis of the material is made of wood processing. HDF aprons are used not only as a protective coating. This finish is a great addition to the interior..

The advantages of the material are high density, temperature resistance and strength. The HDF plastic panel protects the walls well from grease and the appearance of various dirt and even mold. If there is a need for a design update, the apron can be easily dismantled and replaced with another option..

Another advantage of HDF panels is that they lend themselves well to processing. The material can be sawn or cut if the need arises.

As for the design, the external design of the panels resembles a tile, which also refers to the advantages of HDF. The apron made of this material is easy to clean, does not deform under the influence of various detergents.

But, like any other type, HDF panels have slight disadvantages. Many experts and even buyers noted that the material is not reliable. People who leave reviews about HDF panels claim that with mechanical stress or a slight impact, the surface can be easily damaged.

Another disadvantage is that the material can crumble. Basically, this happens during the preparation process. Therefore, during the purchase of panels, it is necessary to choose only high-quality and reliable coatings..

Sometimes the material deforms under constant exposure to moisture. This happens if the panels are based on low-quality and cheap components..

Choice of design

The most popular options include aprons for the kitchen, which are decorated with photo printing. The main advantage of these options is that they complement both light and dark interiors well. Particularly popular are colored panels that fit perfectly into the modern and even classic room decor. Often in the design of the kitchen you can find aprons on which beautiful poppies are depicted..

Such panels look harmonious in light interiors. Red shades perfectly complement the white set. It is best to choose options with a neat pattern..

Bee panels are also popular. Such surfaces differ from other types in their bright and original design. Basically, these options are used by those people who are not afraid to experiment with the interior of the kitchen, and choose bold and interesting ideas..

How to install

Installation of HDF panels is not difficult, so even a novice master can cope with this task. It is best to start the installation when the kitchen is already equipped with a headset. This will avoid measurement errors. There will be no large gaps between the material and the furniture.

The panels can be fastened in two ways: on the crate and on the glue. The first option is used if there are defects on the wall or the surface is not too flat. For arranging the base, standard slats of 20 by 40 cm are used.Before installation, these elements are treated with linseed oil, after which they are thoroughly dried.

The base can be fixed both vertically and horizontally. The distance between the individual elements must be at least 40-45 cm. The apron must be fastened to the base of the rails using self-tapping screws. Sometimes special “liquid nails” are used for this process. This method is more complicated, but its advantage is that, if necessary, the panels can be easily dismantled..

The adhesive method of fastening the material is used when there are no defects on the wall. This method can also be used if the panel is not too long. Otherwise, the finish often sags.

Before proceeding with the installation, the wall is cleaned with sandpaper. This ensures good adhesion of the adhesive to the HDF. The apron is cleaned of dirt from the back, after which the composition is applied (“liquid nails”). The material is tightly applied to the wall, after which fixation is awaited. The panel must be tapped with a special rubber mallet for maximum grip..

After installation, the joints between the finish and the worktop must be treated with a sealant. This will prevent moisture from getting inside..

Tips and tricks for choosing

When choosing a suitable apron, you need to take into account that you will not find a universal cover. When purchasing panels, you need to focus on the operating conditions, as well as your own preferences and capabilities..

When choosing a material, special attention should be paid to the manufacturer. HDF panels from the Aquaton company would be a good option. The company produces material in a laconic and restrained design. Often, panels are used to decorate rooms with high levels of humidity. Quite often, various wholesale companies offer customers products at a lower cost compared to prices in stores..

As for the installation, during execution, special attention should be paid not only to the material itself, but also to the joint filler. The joints between individual elements must be as resistant to dirt and moisture as possible. It is best to choose two-component formulations for filling..

Pay special attention to the choice of panels in accordance with the peculiarities of the kitchen interior. Plates should look harmonious against the general background. That is why it is recommended to choose the material after furnishing the room with furniture. In this case, you can focus on the design of the kitchen in the process of purchasing a protective apron..

9photos

About the author