A lot of dirty dishes remain after cooking. Therefore, a sink is an essential attribute of any kitchen. Choosing a sink cabinet is a responsible and difficult task. It is necessary to consider all the decorative and functional aspects of the acquisition. A wide assortment allows you to choose exactly what suits you.
Choosing a kitchen unit is a responsible thing. Before proceeding, you should study all the varieties. Choose the type of configuration you want based on the size of your kitchen. Manufacturers offer a fairly wide range of sinks with various pedestals. There are two main types of bollard configuration:
Straight cabinets are relevant if the sink is located somewhere along the wall, between other pieces of furniture. The blind area of such a cabinet is rather difficult to access, this reduces the popularity of this configuration..
Corner furniture can be L-shaped or trapezoidal. The first type of vanity unit does not have a back wall. Instead, there are additional transverse webbing to strengthen the structure. The inner space of such a cabinet is clearly visible..
Trapezoidal fittings are often used for mounting sinks with two sections. If you use a compact siphon, there is a lot of usable space inside the cabinet. Carousel shelves can be installed there. It is worth noting that radius cabinets have recently appeared. This cabinet is located in the corner, but has a concave front..
There are different types of washbasin kitchen cabinet doors:
- Two doors. This option is quite familiar and is used with cabinets of any configuration..
- One door. If your cabinet is small, feel free to use this option. But for a large locker, this is extremely inconvenient..
- Double hinged door. Two doors are connected by hinges and open in series. Such doors are convenient for corner cabinets..
- Sliding. This way of opening and closing is well suited for small furniture. But, in general, the option is not very convenient.
- Drawers. They are found in direct configuration boxes. Be sure to provide recesses for pipes and hidden parts of the sink..
- Combined. This option is quite common in our kitchens. Combination of conventional swing doors with drawers.
The main assortment of sink cabinets has only doors. But there are designs with drawers. These boxes are fixed on roller tables and have a specific shape with recesses for pipes. This design option eats up the space under the sink a little, but makes it possible to organize the storage of detergents, sponges and rags. This is a suitable option if you already have enough different cabinets..
The inside of the sink itself with a cabinet may be completely empty, there may simply be hidden parts of the sink and pipes. More often people place various drawers, shelves or baskets in this niche. You can place a small organizer on the cabinet door itself. Some people use this place even more profitably and store mechanisms there for filtering or heating water. In addition, you can put a tray inside for various kitchen accessories..
Sinks with pedestals also differ in size. For narrow sinks, choose a cabinet of 40 cm. Size 50 cm is an option for sinks of non-standard dimensions. But the owners of wide sinks need a width of about 60 cm. Double sinks are now in vogue, pedestals of 80 cm or more are ideal for them. Choose a sink cabinet so that the sink fits snugly from above.
Benefits of a sink with a curbstone
Most people purchase similar designs for the kitchen. In this case, the cabinet holds the sink and hides the water pipes. In addition, with the help of the curbstone, you can maintain a single stylistic design and correctly fit the sink into the interior. Thanks to the sink unit, you have additional space. You can hide various items under the sink: household chemicals or a trash bin.
The corner cabinet has its advantages. The space in the corners is not used in any way, but the corner design solves this problem. Such a curbstone is especially relevant if your kitchen is small. The sink in the corner is always easily accessible, this arrangement optimizes the cooking process.
How to make the right choice
A sink with a curbstone can beautify your interior, but only if you choose it correctly. Be guided by the following rules when choosing this headset for the kitchen:
- The product must be made of the same material as the rest of the kitchen cabinets. The stylistic design may differ, but do not conflict with the overall design.
- The chromed metal door handles and interior fittings will not perform well. Discard furniture with plastic parts. Plastic with gilding looks beautiful, but only for the first time.
- Inspect the product very carefully. All corners and joints, every panel. All these elements must have a uniform coating, without smudges, chips, cracks..
- Be sure to consider the specifics of your own kitchen. If you have a heated floor, then give preference to furniture with legs. This will prevent unnecessary heating of the cabinet..
- Give preference to those models where free space is used with maximum benefit. This is especially true for arranging a small kitchen..
After choosing and purchasing a sink, the next stage begins – installation. To install a sink with a cabinet, follow the instructions:
A sink with a cabinet should be installed where the water pipes are located. Otherwise, you should take care of the supply and output of water in advance. A flat floor is the key to success. If you have any irregularities on the floor surface, then use special underlays..
It’s time to start assembling the cabinet itself. The curbstone has supports, walls, ties and doors. Combine the walls with cross beams. Now attach the bottom and the legs. For a more durable installation, the cabinet should be secured with zip ties, they unite the entire set into a single whole. It’s time to fix the doors and countertop. The latter also has special fasteners for fixing.
At this stage, you need to embed the sink. Make a stencil to fit your sink and place it on your countertop. This is how you can exactly repeat the desired contour. Circle the outline of the stencil. Make a few holes on the inside so that the jigsaw blade is better fixed. It is with its help to cut a hole of the required size. It is important that the sink fits tightly. Thoroughly seal the inner borders with sealant and press in the sink. This fixing method is the most reliable and widespread..
This is the last step and it consists in connecting all the necessary pipes. Install the mixer, bring pipes with cold and hot water to it, respectively. Connect the drain pipe. It is important that you always have access to it..
If all work is carried out correctly, the result will delight you. A sink with a curbstone will look just great and will fit into a single ensemble with other interior items.
Materials for the manufacture of curbstones
The microclimate in the kitchen is quite aggressive. High humidity and temperature changes become a real test for all furniture items. Therefore, all lockers must be made of protected materials. The cabinet under the sink is especially resistant to contact with water, so this is the main requirement for its material..
The three most common kitchen furniture materials are:
The entire lower price segment is occupied with just such a headset. The slabs are pretty good, but they are susceptible to mechanical damage. If a scratch or chip has formed on the surface, then moisture resistance is no longer out of the question. Such furniture is cheap, but often requires replacement..
This material is made of fine wood tiles. Each such plate is impregnated with a specialized binder, which holds the fibers of the material together. This material also requires reliable protection, but is less susceptible to mechanical damage. Such furniture occupies a niche in the middle price segment..
The wood is treated with special water-repellent varnishes. But long-term exposure to an aggressive kitchen environment still affects the furniture. Elite samples are made from natural material.
In order to make a cabinet for a sink, the first two materials are used. But. As mentioned, they require additional moisture protection. There are two most reliable methods recommended by a specialist:
This method is used to protect materials such as chipboard and MDF. This protection technology provides for covering the sheet with a special film, and then with varnish. Thus, the material receives protection from high humidity, pressure and temperature drops..
Such materials are used to protect MDF. The panels are covered with acrylic, enamel or plastic. Thus, you can give the furniture a more interesting appearance. And the protective properties of polymeric materials do not differ from varnish.
Self-made cabinet for sink
Making a cabinet for a sink with your own hands is a convenient option. So you can take into account all your desires and make the perfect set. It is quite difficult to make facades; it is better to purchase them ready-made. To make a straight kitchen cabinet easier, follow these steps:
Thinking through the project
Do some preparatory work. Decide on the material, size and general appearance. Calculate the dimensions of each part and the dimensions of the cabinet as a whole. Standard sizes: 85 cm high, 60 cm wide, 50 cm deep. Experts recommend leaving the height and depth of the cabinet as standard, and changing the width depending on your sink and preferences..
Purchase of materials
Materials can have laminated protection, this is the best option. You need to purchase slabs for the cabinet walls. Choose chipboard or MDF with a thickness of about 16-18 mm. To make the countertop, you will need a thicker plate, at least 22 mm.
For crossbeams, you can use plywood from 12 mm thick or thicker chipboard. Moreover, when using plywood, you will need corners for fastening, and chipboard can be immediately attached to screws. Pressed cardboard can be purchased for the back wall.
Marking and sawing
If you have the skills to work with these materials, then you can easily cope with this task. If you do not have the necessary skills, use professional services. Many firms will offer you to cut slabs at an affordable price..
Each detail of the cabinet has a specific purpose and they need to be assembled in a certain way. Attach the bottom crossbars to the sidewalls. To do this, you can use building corners or simply screw the screws into the beams. If you happen to be away from the corners, then choose a fairly thick material. The caps can be hidden with special overlays. The lower part of the curbstone is now attached. It is recommended to fasten it with screws to the beams.
The next step is to attach the upper crossbeams. Moreover, one of them should be placed vertically and so that it does not protrude beyond the perimeter. Place the second beam horizontally, like the lower ones. Now fix the back wall of the cabinet. If there are drawers in your cabinet, then it’s time to assemble the front frame. After installing the table top, fasten the doors.
Now is the time to tidy up the look of your cabinet. You can close up the ends with plastic tape and an iron..
Perhaps you want to make a different type of locker. The corner cabinet can only have side panels or a trapezoidal structure with a back panel. The side walls have a standard length of 90 cm, a height of 70-72 cm, and a height of the lower plinth within 12 cm. For the manufacture of a tabletop, chipboard with a thickness of 32 to 65 mm is required. The manufacturing and assembly technology itself is similar to working with a straight cabinet..