How to change a light bulb in a stretch ceiling?

To change a light bulb in a stretch ceiling, it is not necessary to seek professional help. You can do it yourself. Replacement instructions will differ depending on the type of lamp installed..

It is not difficult to get a regular incandescent lamp, and before replacing other types of lamps, it is better to read the step-by-step instructions.

For what reasons are bulbs replaced?

Stretch ceiling is a modern design solution that can decorate any interior. When choosing lighting, there is a lot of room for imagination – from a chandelier, LED strip to spotlights of different sizes and shapes.

But sooner or later you have to change the bulbs. Why is this happening?

  • The lamp is out of order. This is the most common reason, so you shouldn’t skimp on buying a lamp. Then the replacement procedure will have to be carried out very rarely..
  • Interior change. This is a common reason that requires the dismantling of old luminaires. But it is not necessary to remove all the bulbs. Sometimes the way out is to buy overlays for spotlights, which will give them an updated look. As for the chandelier, here you can redo each shade or purchase new ones..
  • And another reason why the dismantling of lamps is inevitable is replacement of the whole canvas. It is impossible to change the stretch ceiling to a new one without affecting the fixtures.

If, for some of these reasons, it was decided to replace the sweetheart with another, then you should familiarize yourself in detail with the rules for dismantling each type of lamp. Thus, it will be possible to avoid serious mistakes..

Replacing the halogen lamp

This is one of the most popular luminaire options, which is often used in soffits. It has a high power, hence a short service life.. To replace it with a new one, you need to follow simple rules..

  • First you need to turn off the electricity in the room.
  • You should wear cotton gloves before work, because the housing of the halogen emitter is at a high temperature. Do not touch the surface of the light bulb without gloves.
  • Only after that the fasteners are removed, the old lamp is unscrewed and replaced with a new one.
  • The new model is fixed with fasteners.
  • It should be taken into account that the body of the halogen lamp should be at a distance of at least ten centimeters from the canvas..

Replacing the LED lamp

Such lamps are convenient and profitable, because they do not require a lot of electricity. This means they will last a long time..

But nothing is eternal, so sooner or later this light bulb-tablet will have to be replaced with a new one.. How to do it?

  • First you need to make sure that the electricity in the room is turned off..
  • If the light bulb is replaced in the evening, it is better to take a flashlight with you to make it easier to navigate..
  • After that, you need to remove the fixings of the old lamp..
  • Then the insulation is removed from the wiring..
  • After it is necessary to disconnect the wires.
  • In order not to act “blindly”, it is better to read the instructions for the new lamp.
  • Then directly insert the new LED lamp.
  • Then you need to connect the necessary wiring and fix the cover with screws..

Despite the fact that LED lamps require periodic replacement, they are still more economical and are very popular with stretch ceiling owners..

Replacing a spotlight

Working with this type of lighting fixture will require a little more skill..

  • First you need to disassemble the box, disconnect the wiring and take out the old lamp.
  • For a new luminaire, you need to open the box and connect the wires of the same color.
  • Then, using special pliers, you need to crimp and close the wiring with a cap.
  • When all the wiring is in the box under the cover, you can install the bulbs.
  • Then you need to fix the lamp in the ceiling spot. Its power should not exceed that indicated on the flask..
  • At the end of the work, you can turn on the voltage.

To properly remove the spotlight and screw in a new one, you need to take precautions.

  • Turn off the electricity before replacing the lamp, otherwise it may cause electric shock.
  • The luminaire must be held by the springs, otherwise they will damage both fingers and the ceiling..

Observing these simple rules, you can easily unscrew the spotlight..

Which dismantling is considered wrong?

Some people mistakenly believe that replacing a lamp requires cutting a sheet around it.. But this option is not only wrong, but also dangerous. Why?

  • Firstly, it will be almost impossible to restore the canvas after such a procedure..
  • Secondly, if you touch the wrong wire, it can shock a lot.
  • The new luminaire should be of a larger diameter, because the installation site will increase due to the cut, and the old lamp size will not fit.
  • If the product is under warranty, then after such an intervention, it will cease to function..

With such an impact, the entire stretch ceiling can be irreparably damaged and the only way out is to change it to a new one. Therefore, if you are not confident in your abilities, it is better not to take risks, but to seek help from professionals.

How to remove a chandelier from a stretch ceiling?

It happens that to replace the lamp you need to remove the chandelier. You can do this yourself, following the recommendations..

  • If the chandelier is hanging on a hook, then after removing the protective cap, you need to reach it with your hand and grab this mount. After removing the chandelier from the hook, it is necessary to work with the wiring, disconnecting them.

  • If the chandelier has a cruciform bar, then dismantling it will be a little more difficult. To begin with, the lamp must be freed from the plafond, lamp and other decorations. Only after that the cap is unscrewed and the fastening system is disconnected (you just need to unscrew the screws). Then, by analogy, work with wires.
  • Experts advise against purchasing flat horizontal chandeliers for stretch ceilings, especially with incandescent and halogen lamps. Their heat can melt the canvas..

Some more helpful tips

When replacing a light bulb on a stretch ceiling, it is worth considering some more nuances.

  • If the stretch ceiling is with mirror elements, then you need to change the lamps carefully in order to do without damaging the surface..
  • It is better that the lamps are the same, otherwise the light supply will be uneven. Plus, uniformity always looks more aesthetically pleasing. If you cannot find the correct lamp, it makes sense to replace all.
  • Work better with gloves. This way the lamp will have a long service life..
  • Luminaires with high power are poorly combined with a stretch ceiling. It is not recommended to screw in a lamp with a power higher than 35 watts, otherwise there is a risk of material damage.
  • For preventive purposes, do not overheat the devices unnecessarily, since any equipment needs a break in work.
  • Better not to skimp on quality fixtures. They will last longer and will need to be replaced less often..

Thus, replacing a light bulb is not as difficult as it seems at first glance. The main thing is to strictly follow the recommendations, and everything will work out..

How to change a light bulb in a stretch ceiling, see below.

About the author