Plinth siding appeared on the market not so long ago. The name of the material is conditional. It can be used not only for plinths, but also for cladding facades of buildings, as well as gables of roofs. The only exception is that the material cannot be used for roofing. Consider the intricacies of choosing a basement siding.
In stores, this type of finish can be found in the form of panels. The material includes special chemical compositions with additional binders. Together, these components provide a long service life..
The use of this type of siding implies strict adherence to the installation technology. Otherwise, when the material contracts and expands from the temperature effect, the finished facades may become cracked..
For the arrangement of the facade, in addition to the material itself, some additional details are required. They help to simplify installation, extend the operational life of the foundation. The siding itself belongs to the resistant types of finishes..
The material is not afraid of chemical and atmospheric influences. Therefore, installation is possible in all weather conditions. The choice of material is wide enough.
Any of the types can be used in conjunction with insulating, as well as waterproofing materials. One has only to take into account that some types of basement siding, called thermal panels, already include waterproofers and heaters, which are usually located on the inside of the products. The cost of these types is higher. Such panels have better resistance to sunlight, as well as increased mechanical resistance in comparison with other types of products..
Basement siding is prized for its visual appeal. On the market, you can find variations that imitate stone, wood, brick and many other materials. One product can serve as a quality replacement for many well-known products. Plinths are often indistinguishable from simulated bases even at close range.
The main difference between the basement material and conventional wall panels is that the first option is thicker. The exterior of both types of finishing materials is almost the same. Another feature is that the dimensions of the basement finish differ depending on the manufacturer. Length, width, thickness of products vary. When choosing panels, this fact should be taken into account..
If you need to finish the building along the entire base, large products will help to significantly reduce the work period. If the purpose of use is to finish plinths, it is better to pay attention to narrow but long panels..
If the purpose of the cladding is roof gables, it is worth taking short panels with a width sufficient for the gable..
There are many varieties of basement siding, so this material is often used for cladding. A large number of design solutions allows you to easily select the desired look for specific tasks. Cladding objects can be:
- protruding base;
- facade of the building;
- indoor spaces.
There are several main advantages of the material:
- Moisture resistance. This feature allows the material to be used as interior decoration for baths..
- Ease. The material does not exert additional stress on the verticals, even if the wall “pie” is multilayer.
- High speed of installation. This allows even a non-professional to work with the material. It is enough to study a simple installation technology.
Acrylic basement siding is currently the most popular, although the price of the material is higher than the cost of vinyl options. Also siding is metal. For the production of such products, galvanized steel is used. The base has a special protective coating.
By design, basement siding is divided into many types. For example, option “Under the stone” – high quality modern cladding, suitable for any building. The base is thick enough to be stronger than vinyl samples.
This type of siding is used to trim precisely the basements of buildings, which usually require reliable protection. The rough part of the material creates the effect of a stone base.
Basement siding “Like a brick” has a spectacular appearance. It practically does not differ from its prototype. The required roughness is achieved thanks to the molds that are used as an impression in production. Panels of this type are usually compact. Therefore, even if there are a large number of curly windows in the building, it will not hurt to carefully sheathe the facade..
Basement vinyl siding is usually made of PVC. It is a solid foundation, considered safe and quite suitable for facade cladding. Products are lightweight, easy to install, highly resistant to fire.
Another type of basement siding “Under the rubble stone” attracts with its originality. The appearance of the products is an imitation of a chaotic arrangement of stones of different sizes. This adds sophistication to them. A wide variety of colors are available for buyers.
Basement siding prototype “Under burnt brick” – a similar material that favorably distinguishes the walls of the house against the background of others. The indicators of reliability and durability of this type of siding are at a height.
Variety “Under the alpine granite” is an excellent material with a long service life. It is based on polypropylene. Manufacturers give a guarantee for such products for up to 30 years. This is much more than a guarantee for natural materials that this look mimics..
If you want to add expressiveness to the facade or foundation, you should consider the option “under a rocky stone”.
Products differ in a varied palette. Decor options are usually named after the corresponding heights, which they imitate: “Pamir”, “Altai”, “Tibet”.
Another type of popular product is siding panels with polyurethane foam spraying. This variation is already insulated, so the use of additional materials is not required. This type is suitable for the harshest climates.
Also, among others, such types of socles are known, such as ceramic, concrete, “Under the board”. These types are suitable for both interior and exterior decoration, however, they received great popularity precisely as a facade material..
Plinth siding manufacturers produce different standard sizes of products, focusing on buyers. Correctly selected products are convenient not only to install, but also to transport and store.
Plinth panels with imitation of stone or brick are most suitable for protecting the facade from bad weather or mechanical stress. The panel “under the stone” Hand-cut stone has the following dimensions:
- width – 47 cm;
- length – 121.9 cm.
An external corner 152 mm wide and 4.7 mm high, as well as pediment corners in various colors, may be required as additional products.
Hand-laid brik brick-like panel has the same dimensions as the previous version.
The Hand-split shake panel “for chips” has the same length, but slightly wider – 48.3 cm. Experts advise to choose components of the same type. This approach will help speed up installation and increase the operational life of the foundation. The standard thickness of the panels is about 2.2 cm.
The collection set “Rocky Stone”, distinguished by the expressiveness of the relief, has the following dimensions:
- width – 44.8 cm;
- length – 116 cm;
- thickness – 2.3 cm.
The collection set “for facade tiles” includes imitation of basalt, onyx, travertine, dolomite. The panels are equipped with additional stiffeners. Product dimensions are 116 * 44.6 cm.
Series “Antique” is an accurate depiction of engravings from ancient Egypt, Rome, Greece. The series perfectly conveys the atmosphere of antiquity. The panels also have additional stiffeners, and the dimensions of the products are the same as in the previous version: 116 * 44.6 * 1.7 cm.
Canyon Series differs in the originality of the decor. It includes five options: Arizona, Montana, Colorado, Nevada, Kansas. Panels are usually supplied on sale with dimensions 115.8 * 44.7 * 2 cm.
So, the main standard size range includes products with dimensions 112 * 47.2 cm.To make calculations more accurately, you can provide the sales point consultants with measurements related to the construction object.
If the store’s consultants cannot provide such assistance, you can use a special calculator, which can be found on the website of the manufacturer of the selected product..
The famous brick-like collection is distinguished by a variety of colors. Actual colors:
The red brick-like panel perfectly imitates the natural prototype. The size range of this type is smaller, in contrast to standard options, dimensions: 113 * 46.8 * 1.7 cm.
The color scheme of other products varies depending on the manufacturer. Some manufacturers designate color combinations familiar to everyone as:
When choosing a particular color, you should pay special attention to its resistance to fading. The durability of the siding finish will depend on this factor. Sometimes the composition of the dyes affects a significant increase in the cost of the product. This is due to the fact that titanium dioxide and other additives are added to the paint..
When choosing a color scheme, it is worth checking with the sellers for a certificate. Sometimes sellers who sell really high-quality goods offer to study the so-called xeno tests.
These studies sometimes show that not all color shades, even from one manufacturer, can withstand the UV test..
You need to choose the color of the siding based on a few rules:
- The combination of different options will be successful if the same shade is taken as the basis..
- It is customary to highlight large areas in light colors. Dark tones are usually used for accents..
- Colors that contrast too much with each other should not be used.
Siding, like any other building materials, has popular colors and those that are not used too often. For example, buyers most often pay attention to natural and calm, pastel combinations (white with gray, beige, yellow). Sellers consider red siding to be a rare choice. But the blue color looks rather unusual in decoration, it is referred to as popular options. Also, sellers often advise you to decorate the base with green, purple, black material..
Designers who deal with facades can choose a beautiful color scheme. Prices for the services of decorators vary, usually they are associated with the style of the building, its architectural features.
You can independently choose the finishing option, taking into account the color of the roof. If it is blue, then light (warm or cold) tones will go well with it. If the roof is brown, you can consider light green, white, cream shades. Green roofing will work well with white or gray siding. Red roofing goes well with many shades. Undesirable in this case are turquoise, blue and other shades of this range..
The most famous foreign manufacturers are the following firms: Mitten, Nailite Foundry, Fineber, Georgia Pacific, Kaycan, Gentek and Vitec, Vox, Novik. Among our manufacturers, stand out Deke, Alta Profile, Nordside, Ortho, Horplast, FineBer, Aelit.
The Canadian base is characterized by positive customer reviews. Canadian products are considered reliable, durable and of high quality. The following points are noted in the reviews:
- the material is perfectly cleaned;
- the surface does not crack in winter;
- a wide range of colors;
- easy installation.
Of the minuses, rapid burnout is noted. This flaw is not noticeable on light-colored siding options. But on coatings of dark colors, it manifests itself in full, especially the brown base. On such a material, ugly spots are formed from the sun’s rays within a year after the cladding. Some users find the material to be fragile. According to them, holes can form in the decoration due to mechanical stress (for example, due to hail).
Basement siding is easy to install, so you can choose and install it yourself. However, having bought the required number of panels, do not forget that you will also need additional elements (corners, etc.).
Experts advise starting the installation of basement siding on a pre-prepared crate. First you need to install a startup profile. This part is fixed horizontally, strictly according to the previously made markings. After installing the start panel, additional elements are mounted. Panel fasteners are special nails. They are distinguished by a wide head. Experts also allow the use of self-tapping screws..
During the installation of fasteners, it is not recommended to tighten them all the way.. Compensation gap is necessary, as the panel will change in size due to temperature differences. As a rule, the bottom panels are installed first. After that, the following elements are fixed.
If you follow the technology, you will not have any difficulties in installation.
When starting work, consider all the advantages and disadvantages of the chosen type of siding:
- For example, vinyl siding does not rot or rust. It will not be spoiled by insects and mold. Acrylic siding has similar parameters. However, compared to vinyl panels, acrylic panels are much more expensive..
- The metal version is strong and durable. In production, the products are provided with corrosion protection. The material is considered environmentally friendly, it is also not subject to combustion.
- Fiber cement material has high strength and flexibility. The material is moisture resistant, waterproof. The products are not influenced by natural factors. The flammability of the material is practically zero.
In the calculations, it is important to take into account the perimeter of the house and the height of the basement. If you multiply the perimeter by the height, you can determine the amount of material.
In the calculations, you should take into account some margin, which will come in handy if the panels have to be cut or leveled during work..
- If you like wood-like finishes, look at the variety of options. They differ both in price and in external characteristics. Such siding does not have to be placed horizontally, vertical trim is also allowed..
- A very popular finish today is a vinyl plinth “like a stone”.
- The option “under the tiles” looks no less attractive.
- Often, different types of siding are combined together. You can choose harmonious combinations for your home from our examples or create an exclusive design.
Installation of basement siding, see the following video.